Worker crushed by a pallet of stone tiles that he was delivering

  • Worker crushed by a pallet of stone tiles that he was delivering

    Posted by summer on 21 October 2020 at 6:17 pm

    A transport company has been fined after a worker was fatally injured when the pallet of stone tiles which he was attempting to deliver fell onto him.

    An agency driver was carrying out a delivery for Reason Transport UK Limited at Fraser Road, High Wycombe. The driver was delivering a pallet of stone tiles using a tail-lift and a manual pallet truck. He spent several minutes struggling to lift and maneuver the pallet onto the truck’s tail-lift.

    When he eventually succeeded in doing so, he lost control of the pallet, which fell onto him, causing him to suffer fatal crush injuries, High Wycombe Magistrates’ Court was told. The incident happened on 23 November 2016.

    The HSE’s investigation discovered that the weight of the pallet was recorded as 1,200 kg but the actual weight of the pallet was in excess of 1,400 kg. The pallet was therefore in excess of the 1,000 kg weight limit set by the pallet network for tail-lift deliveries.

    The investigation also found that the driver had worked for the company for two weeks and had not received any training for the safe delivery of pallets using a tail-lift.

    Reason Transport UK Limited, now in liquidation, pleaded guilty to breaching Section 3(1) of the Health and Safety at Work act 1974 and have been fined £5,000.

    After the hearing HSE Inspector Stephen Faulkner said: “This was a tragic and wholly avoidable incident, caused by the failure of the host company to provide training to this agency worker on the safe delivery of pallets from a vehicle with a tail-lift.

    “Transport companies should be aware of the importance of identifying and managing the risks involved with delivering heavy loads and the need to adequately train new staff before undertaking such deliveries.”

    summer replied 4 years, 2 months ago 1 Member · 0 Replies
  • 0 Replies

Sorry, there were no replies found.

Log in to reply.