• Transport

  Arizona train derailment and fire described as 'a scene from hell'

  Posted by Nigel on 29 July 2020 at 9:18 pm

  One person was treated for smoke inhalation after a Union Pacific train derailed and caught fire on a bridge over Tempe Town Lake in Arizona.

  Plumes of black smoke could be seen rising into the sky beneath a trail of flames on video and images from the site of the derailment, where part of the bridge collapsed.

  The train was hauling hazardous material, according to the Tempe Fire Department.

  The Tempe Police Department Police Chief Sylvia Moir urged residents via Twitter to stay away from the scene, which she described as very dangerous.

  The freight train, headed to Phoenix from Tucson, derailed about 6:15 a.m. local time, Union Pacific spokesman Tim McMahan said in a statement. Eight to ten train cars were on fire, according to McMahan.

  The south side of the bridge collapsed, sending rail cars into an empty park below, the statement said. The bridge had recently had its annual inspection on July 9.

  One person was treated for smoke inhalation, McMahan said. The train crew was not injured.

  Three tank cars were on the ground under the bridge, the spokesman said. Two contained cyclohexanone a flammable and colorless oily liquid used to make nylon and as a solvent. The other carried a rubber material.

  McMahan said the tank cars were not reported leaking, and not involved in the fire.

  Fire department spokesman Brandon Siebert said officials were “erring on the side of caution” and keeping firefighters and bystanders “as far away as possible” until they know more about the hazardous material on the train.

  The operator is safe and assisting hazmat technicians, according to Siebert.The cause of the derailment is under investigation.

  “It is possible the derailment led to the partial bridge collapse but don’t know that for sure at this time,” Siebert said.

  Nearly 100 firefighters from Phoenix, Tempe, Chandler, Mesa and Scottsdale responded to the scene, according to Siebert

  
  

  

  

  Nigel replied 4 years, 5 months ago 1 Member · 0 Replies
• 0 Replies

Log In to Reply